Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: make your own xbox controler usb addapter

  1. #1
    around from time to time CMX Jedi's Avatar
    Join Date
    Aug 2003
    Location
    Michigan
    Posts
    1,479

    Default make your own xbox controler usb addapter

    yes if you make your own adapter(or buy one) to plug a Xbox controller into your computer you can use it as a Action Replay with a normal memory card.

    get a spare breakaway wire. I got one for cheaper at Software Etc though.

    get one of your spare USB cables.

    cut them both in the middle.

    twist each matching color wire to it's like color, ignore the yellow wire in the breakaway cable, it's there for light gun support.

    cover each twisted wire with electric tape seperately

    once done with all that wrap it all with electric tape.

    goto codejunkies.com check the download section for Action replay software and install it.

    go here to download software so you can use the controller with your PC. Or check here for an alternate set of drivers.



    now you can use your xbox controller on your PC and use it as an Action Replay.
    Last edited by Doobus48174; 02-13-2004 at 09:10 AM.

  2. #2

    Default

    sounds simple but i think i will just buy mine

  3. #3

    Default

    I'll pass as well
    Executive Editor
    Xboxaddict.com

  4. #4
    Chancellor Of Dark Enemy # 1 Stunner's Avatar
    Join Date
    Oct 2002
    Location
    Midwest
    Posts
    2,050

    Default

    yeah this qoould be cool if u had a good computer to run games on...

  5. #5
    XBC Pro User soulhaloty's Avatar
    Join Date
    Oct 2003
    Location
    British Columbia
    Posts
    60

    Default

    yeah good computers help a lot... the more the better
    XBC: Soulhaloty
    The Soul Clan Leader
    The Soul Clan Forum Administrator
    http://thesoulclan.tk
    XBL: Soulhaloty

  6. #6
    JetLag Returns jelgiad's Avatar
    Join Date
    Apr 2003
    Location
    New Orleans, LA
    Posts
    999

    Default

    sweet, i definately might look into buying one now. 40 bucks for an action replay or 15 bucks for the adapter.....let me think? Dont feel like taking the time to try to make my own.
    "Sanity and happiness are an impossible combination." - Mark Twain

  7. #7
    XBC Pro User soulhaloty's Avatar
    Join Date
    Oct 2003
    Location
    British Columbia
    Posts
    60

    Default

    sweet
    XBC: Soulhaloty
    The Soul Clan Leader
    The Soul Clan Forum Administrator
    http://thesoulclan.tk
    XBL: Soulhaloty

  8. #8
    THE REAL BOSS
    Join Date
    Nov 2001
    Location
    Schaumburg, IL
    Posts
    3,856

    Default

    This mod is so easy it's funny. Took me 10 minutes to complete it.

    And it works great.
    RIP David (DZNUTZ) 5/23/04

  9. #9
    Master Frogman MerimacHamwich's Avatar
    Join Date
    May 2002
    Location
    Calgary, Alberta, Ca
    Posts
    3,469

    Default

    Have two mods. One was shown in my "cribs" apparently no one took notice except like 3 poeple who Pmed me though...
    Hidden Content name="quality" value="high" /> Hidden Content quality="high" bgcolor="#ffffff" width="88" height="70" name="H2lvl" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />

  10. #10
    XBC Pro User soulhaloty's Avatar
    Join Date
    Oct 2003
    Location
    British Columbia
    Posts
    60

    Smile

    nice sig man... that game is going to be aweasome
    XBC: Soulhaloty
    The Soul Clan Leader
    The Soul Clan Forum Administrator
    http://thesoulclan.tk
    XBL: Soulhaloty

  11. #11
    Just stay on your grind DocHoliday78's Avatar
    Join Date
    Jun 2003
    Location
    909
    Posts
    3,090

    Default

    Originally posted by MerimacHamwich
    Have two mods. One was shown in my "cribs" apparently no one took notice except like 3 poeple who Pmed me though...
    Yeah i saw it but all of this is old. People sell connectors for 5 bucks on ebay. Its much more simple and reliable. Damn mac you have been screaming for attention lately dont you think? First the Britney spears look alike and then this. Its not that big of a deal who spreads the word first on a forum.

  12. #12
    XBC Pro User soulhaloty's Avatar
    Join Date
    Oct 2003
    Location
    British Columbia
    Posts
    60

    Default

    i saw it to... dang it i dont like this forumm... so slow!!!!
    XBC: Soulhaloty
    The Soul Clan Leader
    The Soul Clan Forum Administrator
    http://thesoulclan.tk
    XBL: Soulhaloty

  13. #13

    Default

    can u sauder it insted of using tape? and can i sue and xbox extension cord for the controller?

  14. #14
    Registered User Boomer's Avatar
    Join Date
    Apr 2002
    Location
    Ontario, Canada
    Posts
    297

    Default

    I need help get the drivers installed. I got the wires sodered together and taped no wires are touching that shouldn't be, green to green, red to red, black to black, and white to white. then I taped them so they couldn't interfere with each other. I then plugged it into my pc and a box in the bottom right poped up saying new hardware found then it dissapeard and then another one came up saying unkown hardware. and then nothing hapend. Wasn't a device install wizard supposed to pop up? I tried re-booting with out the controller plugged and then I plugged it in while the pc was running but now I get nothing. Is there anyway I can install the drivers manually?
    Last edited by Boomer; 10-23-2003 at 05:23 PM.
    Xbox Games I Own-Halo 2, Forza Motorsports, Gran turismo 4, Mech assault 2: Lone Wolf, Rallisport Challenge 2, Toca Race Driver 2, Burnout 2, Project Gotham Racing 2, Rainbow Six 3, True Crime Streets of L.A, WWE RAW 2, WWF RAW, Midtown Madness 3, Enter the Matrix, Return to Castle Wolfenstein, X-Men Next Dimension, Spiderman, Spy Hunter, Amped, Munches Oddysee

  15. #15
    MuffinMan-XBC
    Guest

    Default

    Yes, soldering would give you a better connection and a stronger hold, i'd suggest using Heat Shrink over top of the connection too, just to spruce it up some ^_^

  16. #16

    Default

    Originally posted by Boomer
    I need help get the drivers installed. I got the wires sodered together and taped no wires are touching that shouldn't be, green to green, red to red, black to black, and white to white. then I taped them so they couldn't interfere with each other. I then plugged it into my pc and a box in the bottom right poped up saying new hardware found then it dissapeard and then another one came up saying unkown hardware. and then nothing hapend. Wasn't a device install wizard supposed to pop up? I tried re-booting with out the controller plugged and then I plugged it in while the pc was running but now I get nothing. Is there anyway I can install the drivers manually?
    did u dl the software to install it?

  17. #17
    Registered User Boomer's Avatar
    Join Date
    Apr 2002
    Location
    Ontario, Canada
    Posts
    297

    Default

    I didn't download any *software* but I did download the drivers adn tried to update the *unknown USB device* to the new drivers vut it wouldn't let me.
    Xbox Games I Own-Halo 2, Forza Motorsports, Gran turismo 4, Mech assault 2: Lone Wolf, Rallisport Challenge 2, Toca Race Driver 2, Burnout 2, Project Gotham Racing 2, Rainbow Six 3, True Crime Streets of L.A, WWE RAW 2, WWF RAW, Midtown Madness 3, Enter the Matrix, Return to Castle Wolfenstein, X-Men Next Dimension, Spiderman, Spy Hunter, Amped, Munches Oddysee

  18. #18
    Uber Dr. Who??? Torlough's Avatar
    Join Date
    Oct 2003
    Location
    NYC
    Posts
    37

    Default

    There seems to be three drivers for the USB/ Xbox controller set up. Is any have experience how would you rate them?

    cuxctrl -

    xctrl -

    psxpad-

    XID-

    From what I gather uninstalling is a pain in the but and alot of people have had mixed reviews about drivers. anyhow I was going to install the cuxctrl.

    Any one have any thoughts on this?
    Last edited by Torlough; 10-24-2003 at 03:07 PM.
    <[WSD]> NTSC Division Uber Pro
    Hidden Content


    Hidden Content

    Distraction
    Ninja of the NAsty

  19. #19
    GRIT Elite Sniper neosoft6666's Avatar
    Join Date
    Oct 2003
    Location
    Netherlands
    Posts
    18

    Default

    thnx m8 for the tutorial!
    Greetingzzz neosoft6666

  20. #20
    The ultimate sniper! BionicSniper's Avatar
    Join Date
    Jan 2003
    Location
    Des Moines, Iowa
    Posts
    20

    Default

    made my own for 5 bucks in 3 mins

    using xid drivers and action replay for memory card and its ASWOME!
    Watch out because my 50 cal sniper round is followed by flaming ninjas!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •