Results 1 to 17 of 17

Thread: Variation's collection

  1. #1

    Default Variation's collection





    I've gotten a few more since this older pictures like the Halo ones and the Ace Combat and some Saint's Row's ones.

    Feel free to PM if you have any others that you are willing to sell (I'm not trading)
    Executive Editor
    Xboxaddict.com

  2. #2

    Default

    Are you giving any away, by chance?

    I am really poor

  3. #3

    Default

    Quote Originally Posted by Conchord View Post
    Are you giving any away, by chance?

    I am really poor
    Actually, I DO have 3 extra Saint's Row ones and about a dozen Outfit ones....

    Question is, what are YOU going to do for it
    Executive Editor
    Xboxaddict.com

  4. #4

    Default

    Ooooh, you've got a couple there that I need. The yellow lava lamp one, and The Outfit. Where did you get the Outfit ones, a regular store like Best Buy? I've been afraid to get The Outfit, Quake 4 and Call of Duty 2 because there's a huge number of bootlegs out there of those three specific plates.

    I've got a number of Saints Row plates too. I just figured I'd use them as bases for customs.
    Faceplates at Hidden Content
    Kinect at Hidden Content .

  5. #5

    Default

    Quote Originally Posted by SpaceGhost2K View Post
    Ooooh, you've got a couple there that I need. The yellow lava lamp one, and The Outfit. Where did you get the Outfit ones, a regular store like Best Buy? I've been afraid to get The Outfit, Quake 4 and Call of Duty 2 because there's a huge number of bootlegs out there of those three specific plates.

    I've got a number of Saints Row plates too. I just figured I'd use them as bases for customs.
    Outfit was free at EB at launch, and since I have a manager friend, I was given enough...

    I got the Q4/CoD2 etc ones early and right away to hoepfully minimize on the fake, though I did find out my PGR one is....but oh well.

    do you just sand/peel off the 'label' and use that as a base?
    Executive Editor
    Xboxaddict.com

  6. #6

    Default

    If you got the Outfit plates at an EB, hang onto one for me because I want to work a deal out with you.

    I sand the plates down just enough to get the shiny part off so the primer has something to grab onto. That is, unless it's one of those Pelican plates, then I totally sand off that logo because it doesn't lay flat.
    Faceplates at Hidden Content
    Kinect at Hidden Content .

  7. #7

    Default

    Can someone tell me why you would want to make boot leg faceplates?

    Also, if I were to want to paint my xbox, what type of paint would stick best?

  8. #8

    Default

    Quote Originally Posted by Conchord View Post
    Can someone tell me why you would want to make boot leg faceplates?
    Some plates that are limited and they only make say 500 or so, they go for big money on Ebay.....so bootleg one, sell it, and voila.
    Executive Editor
    Xboxaddict.com

  9. #9

    Default

    Also, if I were to paint my xbox, what type of paint would stick (read: look) best?

  10. #10

    Default

    Quote Originally Posted by Conchord View Post
    Also, if I were to paint my xbox, what type of paint would stick (read: look) best?
    I don't recommend painting your Xbox directly. If you paint it with the case assembled, you risk getting paint inside the vents and hurting the guts. You also 100% void your warranty. MS won't touch it with a ten foot pole if it's painted. Same deal with opening the console. Instant voided warranty. Plus, opening the box is considered modding, which isn't permissible to discuss in these forums. (Not to mention that I'm totally anti-mod).

    If you want to decorate the sides of your 360 AND keep your warranty intact, get vinyl skins or stickers or something. The local vinyl cutter who makes car window stickers can cut almost any design you want. Ask them for details.

    Or you could do what I did with the original Xbox. I found an empty case, decorated it as I liked and displayed it. (It was DOAX Skins, BTW I displayed it with my other DOA stuff.)
    Faceplates at Hidden Content
    Kinect at Hidden Content .

  11. #11

    Default

    Variation, what is the plate you're holding with all the signatures? I hope to get a definitive catalog of all corporate plates. There are already a couple of sites that have something similar, like www.lowdown411.com. I'd rather partner with them and work something out than try to reinvent the wheel.
    Faceplates at Hidden Content
    Kinect at Hidden Content .

  12. #12

    Default

    Quote Originally Posted by SpaceGhost2K View Post
    I don't recommend painting your Xbox directly. If you paint it with the case assembled, you risk getting paint inside the vents and hurting the guts. You also 100% void your warranty. MS won't touch it with a ten foot pole if it's painted. Same deal with opening the console. Instant voided warranty. Plus, opening the box is considered modding, which isn't permissible to discuss in these forums. (Not to mention that I'm totally anti-mod).
    I don't mod either (I am too stupid), but I would really like to paint my xbox anyway. I have already had it refurbed, and it works fine... besides, my warranty is about to expire anyways, so I will pay them to fix it if it ****s up again.

    I don't want to ruin my innards, however... perhaps you can tell me a safe way to remove the case as to not get paint inside?

    And if anyone knows what the best type of paint to use on the side (I will probably just be using a brush set), I would really appreciate it.

  13. #13

    Default

    Quote Originally Posted by Conchord View Post
    I don't mod either (I am too stupid), but I would really like to paint my xbox anyway. I have already had it refurbed, and it works fine... besides, my warranty is about to expire anyways, so I will pay them to fix it if it ****s up again.

    I don't want to ruin my innards, however... perhaps you can tell me a safe way to remove the case as to not get paint inside?

    And if anyone knows what the best type of paint to use on the side (I will probably just be using a brush set), I would really appreciate it.
    I've never removed a case. Like I said, that gets into modding and I'm against that. One kid gets electrocuted and I'd feel horrible. Just don't do it. Find another way.

    Also, that's what I means about Microsoft not touching it with a ten foot pole. Once you open that box, they won't repair it at all, under warranty OR if you pay them. They won't accept the responsibility when they have no idea what YOU might have done to the inside of the box. They'll see that it's been opened, and mail it right back to you.
    Faceplates at Hidden Content
    Kinect at Hidden Content .

  14. #14

    Default

    Quote Originally Posted by SpaceGhost2K View Post
    Variation, what is the plate you're holding with all the signatures?
    Most of the Red Vs Blue Guys, Gabe and Tycho from Penny Arcade, the Band from Optimus Rhyme, the producer from Table Tennis, and someone else I cant remember at the moment.
    Executive Editor
    Xboxaddict.com

  15. #15

    Default

    Jeez everyone but Bill Gates... how much head did you give for that one?

  16. #16

    Default

    Quote Originally Posted by Conchord View Post
    Jeez everyone but Bill Gates... how much head did you give for that one?
    None, they serviced ME
    Executive Editor
    Xboxaddict.com

  17. #17
    Registered User Bakeman's Avatar
    Join Date
    Feb 2002
    Location
    Hemet, CA
    Posts
    2,101

    Default

    wow Var you got a lot there... crazy

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •